Flooring Installation in Jacksonville, FL

Tile, luxury vinyl, hardwood and laminate — installed for Florida’s humidity and concrete slabs. One crew handles demo, moisture prep, install and trim, so a single company stands behind the finished floor.

New floors change a Jacksonville home more than almost any other upgrade for the money — and they take a beating floors up north never see. Between the humidity, the sandy soil, and the fact that most of us build on a concrete slab, the wrong floor (or the right floor installed the wrong way) shows it fast: cupping planks, cracked grout, moisture trapped underneath. New Empire Remodeling installs flooring throughout Jacksonville and the First Coast — luxury vinyl plank, tile, engineered and solid hardwood, and laminate — and we prep the subfloor for our climate before a single board goes down. Call (904) 820-5573 for a free in-home estimate.

What New Flooring Costs in Jacksonville

Flooring is usually quoted per square foot installed, and the material you choose is the biggest lever on the final number. Based on current 2026 pricing across the Jacksonville market, here is roughly where each option lands, materials and labor included:

Luxury vinyl plank (LVP) — about $5 to $9 per sq ft installed

The most popular choice in Jacksonville right now: quality LVP is fully waterproof, tough enough for kids and pets, and it handles our humidity without the seasonal movement solid wood has. A main living area of 800–1,000 sq ft typically runs about $4,000–$9,000; a whole-home LVP install of 1,500–2,500 sq ft often lands $8,000–$20,000+ depending on the product line.

Tile — about $8 to $15 per sq ft installed

The safest bet for wet and high-moisture areas — bathrooms, laundry rooms, entryways, lanais — and a Florida favorite for whole-home installs because it shrugs off humidity entirely. Large-format and patterned layouts push labor toward the top of the range.

Hardwood — about $10 to $18+ per sq ft installed

The strongest resale story of any floor. In our climate we usually steer clients toward engineered hardwood over solid plank, because its layered construction is far more stable against Jacksonville’s humidity swings while still giving you a real-wood surface. A single room commonly lands around $2,500–$5,000; a main living area $8,000–$18,000+.

Laminate — about $4 to $8 per sq ft installed

A budget-friendly way to get a wood look. Modern water-resistant laminate has come a long way, though for truly wet zones we still point you to LVP or tile.

Two things move every quote beyond the material itself: what is under the old floor and what has to come out. Tear-up and haul-away typically adds about $1–$3 per sq ft, subfloor repair another $1–$3, and on a slab that is not flat or dry, self-leveling and a moisture barrier can add roughly $0.50–$2 per sq ft. In Jacksonville that prep is the difference between a floor that lasts and one that fails in two years — and it all goes in a written, itemized estimate before demo starts.

Ready to transform your space with beautiful new flooring?

How Our Flooring Installs Work

We keep it predictable, and the same crew is with you from the first measure to the final sweep. Here is how a New Empire flooring install goes:

In-home measure & consultation: we look at the actual space, check the subfloor or slab condition, and talk through which materials fit each room and your budget.

Written, itemized estimate: material, prep, demo and install broken out separately — no mystery line items — so you see exactly where the money goes before demo starts.

Prep & protection: we protect the rest of the house from dust, pull the old floor, then test and level the slab and add the right moisture barrier for the product going down.

Installation: we acclimate wood and LVP on site where needed, then lay the floor with tight seams, followed by clean transitions between rooms and new trim.

Final walk-through: we check every seam, transition and edge with you before we call it done.

See some flooring installation videos carried out by New Empire

You can also see other works on our Instagram

Built for Florida Floors — Why Homeowners Choose New Empire

Flooring failures in Jacksonville almost always trace back to moisture and the concrete slab underneath, not the flooring product itself. A slab is never perfectly dry — it wicks ground moisture — so a floor laid over a slab that was not tested and prepped is a floor that will bubble, cup or lift. That is the step bargain installers skip, and the step we do not.

On every install we check the slab for flatness and moisture before choosing an adhesive or underlayment, level low spots so planks do not flex, and add the right moisture barrier for the product going down. In humid conditions we acclimate wood and LVP on site first, so the material has already adjusted to your home. Near the water — Atlantic Beach, Neptune Beach, Jacksonville Beach and Ponte Vedra — salt air and higher humidity make waterproof LVP and tile the smart default over solid hardwood.

One crew, one point of contact, and one company accountable for the whole floor — not an installer who disappears once the last plank is down. And because we also do kitchen and bathroom remodeling, cabinet refinishing and painting, a new floor can be one clean piece of a larger plan instead of a standalone headache.

Flooring Installation FAQ — Jacksonville, FL

The questions we hear most before a floor goes in

What is the best flooring for Jacksonville’s humidity?

For most homes, luxury vinyl plank and tile are the safest choices because they are waterproof and do not move with humidity the way solid wood does. If you want real wood, engineered hardwood is far more stable here than solid plank. The right answer depends on the room — we match waterproof materials to wet areas and give you more options in dry, low-traffic spaces.

Can you install new flooring over a concrete slab?

Yes — most Jacksonville homes are slab-on-grade and we install over slab constantly. The key is testing the slab for moisture and flatness first, then leveling low spots and adding the correct moisture barrier before the floor goes down. That prep is what keeps a slab install from bubbling or lifting later, so we never skip it.

Do I have to remove my old flooring first?

Usually yes, and we handle demo and haul-away as part of the job. Sometimes new flooring can go over an existing floor if it is sound and flat, but on a slab or over old tile we generally recommend taking it up so we can inspect and prep the subfloor properly. We tell you which applies when we measure.

How long does a flooring installation take?

A single room is often a day or two. A main living area typically runs two to four days, and a whole-home install can take a week or more depending on demo, subfloor prep and material. Tile needs cure time, and we will not rush moisture prep just to finish faster.

Is luxury vinyl plank really waterproof?

Quality LVP has a 100% waterproof core, which is why it is so popular here — spills, mopping and humidity do not damage it the way they can laminate or solid wood. Waterproof refers to the plank itself, so proper moisture prep underneath the floor still matters, and that is the part we handle on install.

Can you match new floors to my kitchen or bathroom remodel?

Yes — that is the advantage of one contractor. When flooring is part of a kitchen or bathroom project, we sequence the floor with the cabinets, tile and paint so everything is coordinated on one schedule and the transitions between rooms line up cleanly.

See more on:

Areas We Serve

Jacksonville Neighborhood

Jacksonville Surrounding Cities